Our Metal Briquetting Press is powerful helper in today's metal scraps recycling industry.It is good at pressing loosen metal chips such as aluminum chips,copper slags,swarf,steel turninigs...
The Metal Briguette Machine is usually hydraulically driven. A material is firstly adde into a large bin above a feeding device of a cake pressing machine, a feeding cylinder move forward to feed that material into a die, and then the feeding cylinder returns to reset; And then that main cylinder slightly rise, the block pushing cylinder retreat to drive the slide block to retreat to the position where the cake block can be pressed out, the main cylinder rapidly descends to press the pressed cake block out of the die cavity, the block pus cylinder drives the slide block to advance to push out the cake block, and meanwhile, the block pushing cylinder resets, and the sub cylinder drives the piston rod of the main cylinder and the punch to rise to complete an action cycle.
Any interests in our Hydraulic Briquetting Machine,please feel free to leave your message.
